Photo of a person in a hard hat seen from behind, holding rolled plans and looking at a building site at sunset, darkened, with the title “How to Hire Remote Staff for Estimator, Takeoff, and Bid Work” in white text.

Bid deadlines do not move just because your estimator is already on two other jobs. If you need to hire remote staff for estimator, takeoff, and bid work, you can add help for quantity takeoff, bid forms, and estimate notes without opening a new desk in the trailer or the office. This is a different kind of help from drawing production. For drafting and CAD, use our guide to outsourcing CAD drafting services.

This article covers what remote estimator, takeoff, and bid staff can do, how to brief them, and how to keep the final bid in your hands. Architecture firms hiring for office support rather than estimating should start with how to hire remote staff for an architecture firm.

Key takeaways

  • Remote staff can prepare a thorough takeoff and a clean bid file. What should stay with you is the final price, the judgment calls on risk, and the decision to submit.
  • A rushed “here’s the PDF, go” brief is how takeoff errors start. Send a short kickoff note for each bid.
  • Ask for a first-pass takeoff early enough that you can challenge counts before bid day.
  • You train the person in your process. RemoteProz monitors delivery. It does not set your estimating standards for you.
  • The estimate is about 58% savings per professional at the default setting. The homepage also describes savings of up to 70%. An estimator role may not match the general per-professional figure. Use the calculator for an estimate, not a quote.

What remote estimator, takeoff, and bid work looks like

A remote estimator can work from the same drawings, specs, and addenda your in-house team uses. Common tasks include:

What should stay with you is the final price, the judgment calls on risk, and the decision to submit. Remote staff can prepare a thorough takeoff and a clean bid file. They should not “win the job” by guessing at a number you have not reviewed.

Say this split out loud at the start. It keeps the hire useful and it keeps your company responsible for the bid you submit.

How to hire remote staff for estimator, takeoff, and bid work

Write the scope in the words your team already uses. Do you need a full takeoff, a trade-only takeoff, bid-form support, or help comparing sub quotes? Which software do you use for takeoff and estimating? Which file types will they receive, and how soon after a bid walk?

Ask for work samples that match that scope. A general résumé is weaker evidence than a redacted takeoff or a bid checklist from a similar project type (tenant finish, site work, a school, a small commercial job). Then run a paid test: a short, sanitised bid set with one addendum and a request for a takeoff in your template. Pay for the time. Review whether they labelled assemblies clearly, noted assumptions, and asked about the one thing the drawings left vague.

Hours matter. Bid week is not a nine-to-five habit for every firm. If you need evening coverage before a deadline, say so. Agree how questions will be asked so a late question does not sit in an inbox until morning if you still have time to answer it.

You train the person in your process: your units, your waste factors if you use them, your inclusion list, and your file names. RemoteProz monitors delivery. It does not set your estimating standards for you.

Briefs that prevent a bad takeoff

A rushed “here’s the PDF, go” brief is how takeoff errors start. For each bid, send a short kickoff note:

Ask for a first-pass takeoff early enough that you can challenge counts before bid day. A single late dump of numbers is hard to check. Two passes — a first count and a revised takeoff after your comments and any addendum — will catch more mistakes.

When an addendum lands, send it with a one-line note: what you think it changes, and whether you want a full retake or only the affected sheets. Do not assume they saw the email.

Keep the bid in your control

Use named logins for the estimating software and the bid portal if you give access at all. Many firms keep portal submission in house and only share the takeoff files. That is a reasonable default until trust is built.

Do not let remote staff submit a bid, sign a bid bond request, or talk to a sub as if they were a project manager unless you have clearly asked for that and set the limits. Sub outreach, in particular, can create confusion if two people from your company are asking for the same quote.

Review the takeoff against the drawings yourself, or have a second person in your firm do a spot check on the largest quantities. The point of hiring help is not to stop reviewing. It is to stop doing every count by hand when you should be looking at risk and price.

You can try remote staff in month one, and billing starts in month two only for the people you keep. A quiet month is a good time to run the first test bids. If you hire in the middle of a live deadline, keep their first job smaller than your most important submission.

Cost and how this differs from drafting help

Based on the RemoteProz savings calculator on the homepage, the estimate is about 58% savings per professional at the default setting, compared with a traditional in-house hire. The in-house side includes salary, benefits, office, and training; the RemoteProz side is an all-inclusive service. The homepage also describes savings of up to 70%. The exact price depends on the role and your needs, and an estimator role may not match the general per-professional figure. Prices are customised, and they are more affordable and efficient than typical market options. Use the calculator for an estimate, not a quote. A wider comparison is in the cost of hiring remote staff vs in house.

Keep this work separate from CAD drafting even if one person has both skills. A takeoff and a drawing set have different briefs, different review steps, and different risks if something is wrong. Hire and brief them as distinct jobs.

Want a price for a specific role?

Tell us the role you have in mind and we’ll talk you through your options.

Frequently asked questions

Can remote staff complete a full bid for us?

They can complete the takeoff, the forms, and the file you will use to bid. Your firm should set the final price and submit the bid.

What if our estimating software is specialised?

Say which tool you use up front and test it. If they will work from your spreadsheet export instead, say that too, so no one wastes a week on the wrong method.

How do we handle addenda late in the week?

Agree a same-day warning method (a call or a pinned message) and a short list of what changed. Ask for a revised takeoff on only the affected items when time is short.

Is this the same as hiring a drafter?

No. Estimator, takeoff, and bid work is about quantities and price files. Drafting is about the drawings themselves. Use the CAD drafting guide if that is the help you need.

If you want help on upcoming bids, contact RemoteProz to talk about an estimator or takeoff role, a paid test, and a month-one trial while you train the person on your process.

Next step

Tell us the role you have in mind and we’ll talk you through your options.

Leave a Reply

Your email address will not be published. Required fields are marked *